New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Miramar pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ECO Window Systems Door Installation: The Miramar Owner’s Guide
ECO Window Systems door installation in Miramar typically runs $1,800 to $4,200 for a standard replacement, depending on frame material, impact rating, and whether the rough opening needs reframing. We stock ECO Window Systems hardware and carry the common frame profiles on our trucks, so most Miramar jobs start within one to three business days of the measured survey. Most owners discover their ECO door is failing when the sweep drags, the multipoint lock won’t throw, or they feel salt-air draft around the jamb during a northeast wind.
Which ECO Window Systems Models This Applies To

ECO Window Systems produces three door lines we regularly see in Miramar: the ECO 4000 Series (non-impact vinyl patio door), the ECO 5000 Series (impact-rated aluminum), and the ECO 8000 Series (thermally broken aluminum with integrated blinds). The label is stamped on the hinge jamb or the top rail of the sliding panel, and it includes a six-digit serial prefix that tells us the exact extrusion profile and glazing stop depth.
Here is the compatibility gotcha: ECO changed its multipoint locking system supplier in 2019. A 2018 ECO 5000 uses a two-bolt face-mounted gearbox with 45 mm backset; 2019 and later use a three-bolt mortise with 55 mm backset. The holes do not line up, and the older gearbox is no longer available from ECO. We machine an adapter plate in our shop for those retrofits rather than forcing a mismatch that strips the mounting threads. For aftermarket hardware, we use Amesbury Truth or Hoppe components that match the ECO spec, not generic big-box latches that wear out in eighteen months against South Florida’s salt load.
Before
AfterSigns Your ECO Window Systems Door Installation Is Failing
- The panel sticks or jumps the track. ECO’s tandem roller assemblies use a nylon wheel on a zinc-plated axle. After five to seven years near Miramar’s coast, the axle pits and the wheel develops flat spots. The door feels heavy because it is, the rollers are no longer round.
- Visible daylight under the sweep or between the frame and wall. The ECO vinyl sweep is a replaceable part, but if the frame has settled or the sill pan was never flashed correctly, the gap is structural. We check with a straightedge and a feeler gauge, not caulk as a cure.
- Condensation between the glass layers. ECO’s insulated glass units carry a ten-year warranty, but the seal fails faster on west elevations with no overhang. Miramar’s afternoon sun drives expansion cycles that test the butyl seal.
- The multipoint lock handle spins or the bolts don’t retract. The gearbox wears where the spindle passes through. On the pre-2019 design, the pot metal housing cracks at the lower bolt mount. We replace the full mechanism, not just the handle.
- Corrosion bloom on the frame or hardware. ECO’s 5000 Series aluminum is powder-coated, but cut edges and fastener holes are bare metal. Salt air enters at the weep holes and works from the inside out. We see this on homes west of Palm Avenue, closer to the wetlands.
Replacement Cost & What’s Included

| Component | Typical Range (Miramar) |
|---|---|
| ECO 4000 Series vinyl patio door, installed | $1,800 - $2,800 |
| ECO 5000 Series impact aluminum, installed | $2,800 - $4,200 |
| ECO 8000 Series thermally broken, installed | $3,500 - $5,500 |
| Multipoint lock / gearbox replacement only | $340 - $580 |
| Roller assembly replacement (both panels) | $220 - $380 |
| Insulated glass unit replacement | $480 - $720 |
| Rough opening reframing / sill repair | $400 - $1,200 |
The range depends on three things: whether the existing frame is square within one-eighth inch, whether the wall is block or frame construction, and whether the door is impact-rated. Impact-rated ECO doors require a Miami-Dade NOA-matched installation with specific fastener spacing, documented with photos for the 365-Day Done Right Promise. Our quote includes the measured survey you keep, the written scope, the installation, and the photo record. No change orders. The price we write is the price on the invoice.
DIY or Call Us?
There is one thing an owner can safely check: the weep holes at the sill. If they are packed with debris, clear them with a piece of wire. Water that cannot exit rots the subfloor and corrodes the frame from below.
Everything else carries risk. ECO’s impact-rated doors weigh ninety to one hundred forty pounds per panel. Removing one without proper support bends the track or shatters the glass. The multipoint lock interfaces with the keepers at three points; if the new gearbox is not shimmed to the correct backset, the bolts miss the keepers and the door appears locked when it is not. We have been called to Miramar homes where a well-meaning owner stripped the spindle bore trying to force a mismatched handle.
Measure it right the first time. Everything else follows from that. Call (754) 260-1468 and we will schedule the measured survey. The written price comes before any work starts.
FAQs

Twelve to eighteen years for the vinyl 4000 Series, fifteen to twenty for the aluminum 5000 and 8000 Series, assuming proper installation and annual weep-hole maintenance. The multipoint lock and rollers are wear items that typically need attention at year seven to ten. Call (754) 260-1468 for an exact quote on replacement, estimates are free.
Yes, if the frame is square and the glass is intact. We replace isolated components, the lock, rollers, sweep, or glass unit, and document the work with photos. If the frame has settled or the sill is rotted, component repair is false economy. Call (754) 260-1468 for an exact quote, estimates are free.
A straight replacement in a square opening takes four to six hours. If the rough opening needs reframing or the stucco return must be cut back, plan on one to two days. We leave a documented photo record either way. Call (754) 260-1468 to schedule.
We stock the common roller assemblies, multipoint locks for 2019 and later models, sweeps, and keepers. Older gearboxes and custom-size glass units are ordered with a five to ten day lead time. We confirm availability during the measured survey so there are no surprises. Call (754) 260-1468 to schedule.
Sightline Windows & Doors Miramar is an independent service provider. We are not affiliated with ECO Window Systems. We also stock and install parts for PGT, CGI, and CWS door and window systems.
Written by Sonia Raman, Owner, Sightline Windows & Doors Miramar at Sightline Windows & Doors Miramar, serving Miramar and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Miramar
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Miramar Services
