New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Miramar pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Sliding & Patio Doors Across Plantation
Sliding and patio door replacement in Plantation typically runs $2,800-$6,500 for a standard impact-rated opening, with most homeowners receiving a written quote within 48 hours of their measured survey. We’re the Sliding & Patio Doors team at Sightline Windows & Doors Miramar, and we coordinate dispatch from our Miami office for jobs across central Broward County. If your slider won’t latch, your track is seized, or your insurer is asking for wind-mitigation documentation, call (754) 260-1468 to schedule your free measured survey. We’ll bring the written price with us. You keep the document.
Why Sightline Windows & Doors Miramar Is Plantation’s Preferred Sliding & Patio Doors Company

We’ve measured openings in Plantation’s master-planned communities since 2012 - from the original Jacaranda phases to the newer developments west of University Drive. That history means we know which subdivisions carry 1970s aluminum sliders on failing tracks and which carry early-2000s builder-grade units that still have warranty coverage to protect.
Our crews are background-checked, uniformed, and identified by license number before arrival - Haven Clause 3, Verified Crews. The technician who rings your doorbell is the same name on our dispatch record.
Phone calls are answered by a live person, 24/7. Not a callback window. Not a queue.
Every job leaves a documented photo record and carries the 365-Day Done Right Promise, written into the Haven Standard - not offered as a courtesy, stamped on every invoice.
Before
AfterOur Sliding & Patio Doors Services in Plantation
Patio Doors
Standard patio door replacement in Plantation’s 1970s ranch stock often uncovers pitted aluminum frames and failed factory seals that no longer meet HVHZ requirements. We specify ECO Window Systems and ViewLux vinyl-framed sliders for homeowners who want impact-rated performance without the premium of aluminum-clad systems. The measured survey documents your exact rough opening, jamb condition, and header load - you keep that document, and the written quote cannot differ from it.

Impact Sliding Glass Doors
Every replacement sliding glass door in Plantation must carry a Miami-Dade Notice of Acceptance or documented Florida Product Approval - Broward County sits entirely within the High-Velocity Hurricane Zone, and inspectors will not close a permit without this documentation. We specify PGT and CGI impact sliding systems with design pressures matched to your opening’s exposure, not a generic rating pulled from a catalog. Our field team shoots the required photos for your wind-mitigation file before we leave the site.

Sliding Glass Door Replacement
Plantation’s sliders are aging on a bell curve: subdivisions built in the first half of the 1970s hit the 50-year mark on original frames before the late-1970s and early-1980s phases do. Two identical-looking ranch homes in the same community can be years apart on sash condition, permitting requirements, and whether an insurer will write the policy without documentation. Our measured survey identifies which category your opening falls into - repairable track and hardware, or full-frame replacement with HVHZ-compliant documentation.

Impact French Patio Doors
French patio door upgrades in Plantation’s newer developments require coordination with HOA architectural review boards before permitting. We carry Therma-Tru and Mr-Glass impact-rated French door systems in standard and custom configurations, and we document the approved color, grille pattern, and hardware finish in your written scope before fabrication begins. No change orders. The measurement and the quote are the same document.

Screen Door Installation
Standalone screen door replacement on Plantation sliders often reveals the underlying glass panel has failed its factory seal - interior fogging between panes that the homeowner didn’t notice until the screen was removed. We inspect the full opening before quoting screen-only work, and we’ll flag when the insulated glass unit needs replacement alongside the screen panel.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Plantation

We specify from eight manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - matched to your opening’s performance requirements and your price range, not our inventory levels. For Plantation’s salt-air humidity, we favor marine-grade hardware and vinyl or aluminum-clad frames with thermal breaks, specified by what the opening requires. Local parts availability means most hardware and roller replacements ship within 48 hours; custom impact-rated fabrication runs 4-6 weeks from order to install.
Common Sliding & Patio Doors Problems We See in Plantation Homes
- Seized tracks from salt-air corrosion. Original aluminum slider tracks pit and seize in Plantation’s persistent humidity until the door no longer latches. Broward County inspectors won’t close a sliding-door permit on a track that can’t meet its design pressure rating - the full opening gets re-framed.
- Corroded rollers and misaligned latches. Non-marine-grade rollers and latches on builder-grade sliders corrode at the jamb within a few seasons, leaving the panel racked and the lock striker misaligned. The fix requires new hardware, not just adjustment.
- Failed interior glass seals. Interior glass on pre-A168 aluminum sliders fogs after 30-50 years. A homeowner who only wanted a new screen door often ends up re-glazing the whole opening with an insulated glass unit and laminated interlayer.
- Jalousie panels that cannot be retrofitted. Louvered glass panels standard in Plantation’s 1960s-1970s subdivisions physically cannot meet HVHZ impact requirements. Every jalousie unit is a mandated full replacement, and Broward County inspectors will not approve a permit-close without a qualifying NOA-stamped substitute.
What Sliding & Patio Doors Costs in Plantation

A typical sliding glass door replacement in Plantation runs $2,800-$4,500 for a standard 6-foot vinyl-framed impact-rated unit, $4,200-$6,500 for aluminum-clad or larger 8-foot openings, and $7,500-$12,000 for custom multi-panel or oversized configurations. Whole-home slider packages on Plantation’s ranch plans - usually two to three openings - fall in the $8,000-$18,000 range.
What moves the price in this market:
- Opening count and size. A 6-foot slider costs less per linear foot than an 8-foot or multi-panel unit.
- Wind zone and design pressure. Plantation’s HVHZ status requires higher DP ratings than inland Florida zones - the glass and frame spec must match.
- Floor height and access. Second-story openings or tight backyard access add labor for material handling.
- Frame material and finish. Vinyl with marine-grade hardware sits at the lower end; thermally broken aluminum with custom color matching runs higher.
We do not quote from photos or rough descriptions. Every estimate begins with a measured survey you keep, and the written price cannot differ from that document. Call (754) 260-1468 to schedule yours.
Pricing for Sliding & Patio Doors in Plantation, FL
The ranges above reflect what we see on Plantation jobs week to week. Your exact price depends on the measured survey - rough opening dimensions, existing frame condition, header load requirements, and whether your HOA or builder warranty imposes specific brand or finish constraints. We offer a free second opinion on any written estimate from another contractor. Bring us their scope, we’ll review it against your opening’s actual requirements at no charge.
Florida Pays You Back

Plantation homeowners stacking incentives on impact-rated sliding door upgrades should know the programs that apply:
- My Safe Florida Home matching grants - up to $10,000 for qualifying wind-mitigation upgrades, including impact-rated door replacements on homes built before 2008.
- Florida sales-tax exemption - impact-resistant windows and doors are exempt from state sales tax at point of purchase.
- Federal 25C energy credit - 30% of product cost, up to $600 per year on qualifying energy-efficient units.
- Windstorm-premium credits - averaging around 25% on the windstorm portion of your premium after a qualifying wind-mitigation inspection ($75-$150 for the report).
Program eligibility and carrier credits vary. We document the NOA numbers and product approvals your insurer will need; the final incentive calculation is between you and your agent.
We Also Serve Cities Near Plantation
Our crews work across central and south Broward County, including Plantation, Pembroke Pines, Hollywood, Miami Gardens, and Hialeah. Dispatch and scheduling are coordinated from our Miami office; every job carries the same Haven Standard documentation and written-price guarantee regardless of city.
Serving Plantation, FL - Our Local Coverage Area

We’re based in the Plantation area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Sliding & Patio Doors in Plantation
Yes. Broward County’s full inclusion in the High-Velocity Hurricane Zone means every replacement window and door must carry a Miami-Dade Notice of Acceptance or documented Florida Product Approval - HOA architectural approval is separate from code compliance, and the county inspector will not close your permit without the NOA. Call (754) 260-1468 and we’ll verify the NOA status of any product you’re considering before you order.
Most carriers reduce the windstorm portion of your premium by roughly 25% after a qualifying wind-mitigation inspection documents impact-rated openings - but the exact credit depends on your carrier, your policy structure, and what other wind-mitigation features your home already carries. We shoot the required photos and document the NOA numbers; your inspector submits the form. Call (754) 260-1468 for a free estimate and we’ll flag what documentation your specific insurer typically requires.
Check your builder warranty documents for a “like-for-like” or “approved contractor” clause - many Plantation developers require impact-rated replacements but specify the work must be performed by a licensed contractor who pulls the permit and provides a NOA-stamped product. We document every step for your warranty file: permit pull, inspection pass, photo record, and written scope. Bring us your warranty language and we’ll write the quote to match its requirements.
No. Jalousie windows and louvered sliders physically cannot be retrofitted to meet HVHZ impact requirements - the louvered design has no continuous frame to accept laminated glass or impact-rated glazing. Every jalousie unit in Plantation is a mandated full replacement, and Broward County inspectors will not approve a permit-close without a qualifying NOA-stamped substitute. We see these most often in the Jacaranda and Plantation Acres phases built 1965-1975. Call (754) 260-1468 for a measured survey of your specific openings.
Ask for a Miami-Dade NOA or Florida Product Approval number matched to your opening’s design pressure - not a generic “impact-rated” label. For the frame, specify marine-grade hardware and a thermal break if you’re choosing aluminum; for glass, laminated impact-rated with a low-E coating and argon fill for energy performance. We carry PGT, CGI, ECO Window Systems, and ViewLux lines that meet these specs at different price points, and we specify by what your opening requires, not by what’s in stock. Call (754) 260-1468 for a written quote with the exact NOA numbers.
Our tech was out in Jacaranda on a 1974 CBS ranch where the original single-pane aluminum slider had been sealed shut with caulk for years; the roller tracks were pitted, the front sash wouldn’t slide without a pry, and the interior glass was fogged - a failed factory seal, not a cracked pane. We replaced the full opening with a PGT impact sliding glass door carrying a Miami-Dade NOA, shot the required photos for the owner’s wind mitigation file, and confirmed the screened panel and header trim stayed inside the community’s approved color before we set the frame. The homeowner had two other sliders on the same plan, so we wrote the permit to cover all three openings at once instead of paying for three separate pulls.
This is what we mean when we say the measurement and the quote are the same document. We found the condition, we documented it, we wrote the scope, and the homeowner knew the exact price before anyone lifted a tool.
Ready for your measured survey? Call (754) 260-1468 to schedule your free estimate. You’ll receive a written price before any work starts, a documented photo record when the job is done, and the 365-Day Done Right Promise on every opening - Haven Standard, every time.
Written by Sonia Raman, Owner at Sightline Windows & Doors Miramar, serving Plantation and central Broward County under the Haven Standard since 2012.
Six Reasons Homeowners Choose Sightline Windows & Doors Miramar
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Miramar Services

