Door Installation in Miramar - Free In-Home Measure, Written Price

Trusted Door Installation for Miramar Homeowners

Door installation in Miramar typically runs $1,200-$4,800 depending on the door type, framing condition, and whether you’re replacing an existing unit or cutting a new opening. Most standard replacements are completed in a single day, with the measured survey and written quote delivered before any work begins. Call (754) 260-1468 to schedule your free estimate - our lines are answered by a live person, 24/7.

Call (754) 260-1468

We’ve installed and replaced doors across Miramar since 2012, from single-family homes in Monarch Lakes to townhouses in SilverLakes and estates along the Miramar Parkway corridor, and we’ve completed similar Door Installation - Pembroke Pines projects throughout the region. Every one of those installations - more than 18,000 openings total - left the customer with a written price before work started, a documented photo record when it finished, and the 365-Day Done Right Promise stamped on the job under the Haven Standard. Miramar’s position in Broward County means your doors face specific pressures: the summer wet season drives moisture into improperly flashed frames, hurricane codes require impact-rated or protected openings, and the calcium-rich soil common west of Florida’s Turnpike can shift door frames out of square over time. We measure for these conditions, specify for them, and document what we found in the survey you keep.

What Our Door Installation Service Includes

Entry Doors

An entry door is the primary access point to your home, and in Miramar it must balance curb appeal with code compliance for wind-borne debris protection. We see the most entry door replacements in homes built between 1985 and 2005, where original fiberglass or steel units have delaminated, sagged on their hinges, or lost their weatherstripping compression. At Sightline Windows & Doors, we measure the rough opening to 1/16-inch, check the sill pan and flashing integrity, and specify from our Therma-Tru and ES Windows lines based on your exposure - west-facing entries in Miramar take more afternoon thermal cycling and need different jamb specifications than shaded north-facing units. The written quote includes the door slab, pre-hung frame, hardware, threshold adjustment, and debris protection upgrade if your home lacks a rated garage door or shutters.

Hurricane-Proof Front & Entry Doors

Hurricane-proof front doors, properly called impact-rated doors, are tested to Miami-Dade County’s strictest protocols for large-missile impact and cyclic pressure loading, the same standards applied in Miami Gardens Door Installation work. In Miramar, any door within one mile of the coast or in a wind-borne debris region must be impact-rated or protected by an approved shutter system; many homeowners west of Hiatus Road discover their existing door is decorative-only when they attempt to sell or renew insurance. We specify impact-rated entry doors from PGT, CGI, and Mr-Glass based on your home’s wind speed zone and exposure category, not based on what we have in stock. The installation includes a laminated glass inspection, frame anchoring to the structural header with documented torque values, and a photo record of the fastening pattern before trim goes back on. Every impact door we install carries a Florida Product Approval number traceable to the specific lot.

French & Double Doors

French doors and double-door units create wide openings to patios, pools, and Florida rooms, but they also multiply the failure points - two sills, two sets of hinges, an astragal that must seal against wind-driven rain, and often an in-swing configuration that traps water. In Miramar, we regularly see French door failures in homes near the C-9 canal basin, where seasonal high water tables keep slab moisture elevated and corrode aluminum thresholds. Our measured survey checks the subsill drainage path, the head flashing, and the operational clearances between the active and inactive leaf. We specify from ECO Window Systems and ViewLux for wider openings, with multi-point locking hardware and composite sills that don’t wick moisture. The written scope includes whether we’re working within an existing cased opening or reframing for a larger unit, and the price does not change once that scope is signed.

Replacement Doors

Replacement door installation is what most Miramar homeowners need - removing an existing door and frame, inspecting the rough opening for rot or termite damage, and installing a new pre-hung unit with proper insulation, air sealing, and trim integration. The difference between a replacement that lasts and one that leaks in two years is what happens before the new door goes in. We remove the old unit completely, probe the jack studs and sill plate with a moisture meter, and photograph any decay before you see it. In the Pembroke Pines and Miramar border areas, we find carpenter ant damage in roughly one of every eight replacement jobs - not because the previous installer was negligent, but because Florida’s construction methods before 2000 often used untreated lumber at the sill. Our quote includes the remediation or tells you explicitly if structural repair is outside our scope, with a referral to a licensed contractor we trust.

Storm & Exterior Doors

Storm doors and exterior screen doors are the secondary line of defense - they reduce wind pressure on the primary door, provide ventilation security, and add an air gap that improves thermal performance. In Miramar, where afternoon thunderstorms can drop two inches of rain in thirty minutes, a properly installed storm door with a drip cap and sill extension prevents water from running down the face of your entry door and pooling at the threshold. We measure for storm doors after the primary door is installed or verified square, because a storm frame mounted to a racked opening will bind every season. Our ViewLux and Therma-Tru storm door specifications include the closer arm strength, the sweep type for your threshold height, and whether you need a retractable screen or a fixed panel. The price is in the written quote, and the installation is timed so we don’t compromise the primary door’s weather seal.

Before

After

Brands We Service for Door Installation

We work with eight manufacturer lines, specified by what your opening requires, not by what we need to move from inventory. For entry and storm door applications in Miramar, we most often draw from Therma-Tru, ES Windows, and Mr-Glass, and we also provide our Door Installation in Plantation using these same manufacturer lines. Therma-Tru’s fiberglass door systems have been our specification for Miramar’s 1990s-era homes with 6’8″ openings and standard hinge mortise patterns - we’ve installed hundreds of their Classic-Craft and Smooth-Star lines, and we stock their OEM hinge screws, composite sills, and adjustable thresholds to match existing trim without custom millwork. ES Windows provides our aluminum impact-rated entry systems for modern and coastal homes, with thermal breaks that meet Florida’s energy code without the bulk of older aluminum frames. Mr-Glass supplies laminated door glass and impact-rated sidelite assemblies; we’ve replaced their units in Miramar’s gated communities from Riviera Isles to Sunset Lakes, and we carry their glazing bead profiles and setting blocks for exact-match repairs.

Whether you have Therma-Tru, ES Windows, Mr-Glass, or any other make - including PGT, CGI, CWS, ECO Window Systems, or ViewLux - we can help. Our technicians arrive with the manufacturer’s installation bulletins for your specific product line, and we verify the warranty registration requirements before we leave. If your door is still under manufacturer warranty, our installation preserves that coverage; if it’s out of warranty, we document the condition and give you a written scope with no pressure to proceed.

Signs You Need Door Installation Right Now

• Visible daylight around the frame. If you can see light between your door slab and the jamb when it’s closed, your weatherstripping has compressed beyond recovery or the door has sagged on its hinges. In Miramar’s climate, this gap also admits humid air that drives up cooling load and can trigger mold growth on the interior casing.
• Water staining on the interior floor or drywall. A brown ring at the base of your door frame or bubbling paint on the adjacent wall means water is finding a path through the sill pan, the flashing, or the threshold seal. The C-9 basin and areas west of Hiatus Road see this most often during our summer wet season, when saturated ground can’t absorb a heavy downpour and water seeks any horizontal surface.
• The door sticks seasonally or has stopped latching. A door that worked in January but drags in August is telling you the frame has shifted relative to the slab, or the hinge screws have stripped out of the jamb. In Miramar’s newer construction, this often traces to inadequate shimming at installation; in older homes, it can signal slab settlement or termite damage in the jack studs.
• Corrosion or pitting on hardware and thresholds. Salt air reaches farther inland than most homeowners assume, and Miramar’s afternoon sea breeze carries enough chloride to attack unprotected aluminum and steel. If your hinges are rusting or your threshold has white oxidation pitting, the door’s protective coatings have failed and the underlying metal is next.
• Your insurance or wind mitigation inspection flagged the door. Florida insurers increasingly require documentation of impact-rated or protected openings for renewal. If your four-point or wind mitigation report notes a non-compliant entry door, you have a defined timeline to correct it before coverage changes or premiums increase. We provide the Florida Product Approval documentation and installation certificate your underwriter needs.

Our Door Installation Process - Step by Step

1. 1
   Measured survey and written quote. We arrive with a laser measure, moisture meter, and level. The technician records the rough opening width, height, and squareness; checks the sill plate and jack studs for moisture content above 18%; and photographs the existing conditions. You receive a copy of this survey and a written quote that cannot differ from it - Haven Clause 1, the founding principle of Sightline since 2012. The quote specifies the door model, frame type, hardware, debris protection rating, and total installed price.
2. 2
   Product specification and order. Once you approve the written scope, we order from the manufacturer with your specific rough opening dimensions and exposure requirements. For impact-rated doors, this includes the Florida Product Approval number, the design pressure rating for your Miramar wind zone, and any custom glass or finish selections. We confirm the lead time and schedule installation before the product ships, so you’re not left with an open rough opening.
3. 3
   Pre-installation preparation. Our crew arrives in uniform, with license numbers provided before entry - Haven Clause 3, Verified Crews. We protect your floors, move furniture clear of the work area, and stage tools on padded surfaces. The existing door and frame are removed completely, not cut in place, so we can inspect the full rough opening and treat any decay before the new unit goes in.
4. 4
   Installation and documentation. The new pre-hung unit is leveled, shimmed, and fastened to structural framing with specified anchors - not finish nails into the jamb. We spray-test the exterior with a calibrated nozzle to verify flashing integrity, check the threshold height against interior flooring transitions, and operate the hardware through full cycles. Every step is photographed: the rough opening condition, the fastening pattern, the spray test, and the finished operation. This photo record is yours, included standard, not an upsell.
5. 5
   Final walkthrough and warranty registration. You operate the door yourself, confirm the lockset function, and review the documented photo record on our tablet. We register the manufacturer warranty with your information, provide the 365-Day Done Right Promise in writing - Haven Clause 5, No surprises - and leave you with the measured survey, the written invoice that matches the quote, and a direct contact for any follow-up. The price on the final invoice is the price on the quote, to the cent.

How Much Does Door Installation Cost in Miramar?

Door Installation Near Miramar - Our Service Area

We install and replace doors throughout Broward and southern Palm Beach counties, with typical response times of same-day to 48 hours for estimates depending on your location relative to our Miramar dispatch point. Our regular service area includes Pembroke Pines to the north, Miami Lakes and Hialeah to the south, Cooper City and Davie to the east, and Weston to the west. We also work in Miami Gardens, Hialeah Gardens, Hollywood, Doral, and Plantation for full-door replacements and impact-rated upgrades. For homes in the Miami Lakes and Hialeah corridor, we account for the slightly different wind speed zone requirements in Miami-Dade County versus Broward, and we pull permits in the correct jurisdiction with the correct product approval documentation. Wherever you are in our service area, the process is identical: measured survey, written quote, verified crew, documented completion.

Frequently Asked Questions - Door Installation in Miramar

Schedule Your Door Installation Service in Miramar Today

Call (754) 260-1468 to schedule your free estimate. A live person will answer, 24/7, and we’ll arrange a measured survey at your Miramar home. You’ll receive the written price before any work starts, a verified crew identified by license number, and a documented photo record when the job is done - all under the Haven Standard that has governed every one of our 18,000+ installations since 2012. There’s no obligation to proceed; the estimate and the survey are yours to keep.

Written by Sonia Raman, Owner at Sightline Windows & Doors, serving Miramar since 2012.